Write a program to control the operation of the RED/GREEN/BLUE LED (LED2) as follows: 1. If no button is pressed, the LED should remain OFF. 2. When only Button 1 is pressed, the BLUE LED should blink ON and OFF with a 1 second period. The RED and GREEN LEDs should remain OFF. 3. When only Button 2 is pressed, the RED LED should blink ON and OFF with a 4 second period. The GREEN and BLUE LEDs should remain OFF. 4. When both Buttons are pressed, the GREEN LED should blink ON and OFF with a 2 second period. The RED and BLUE LEDs should remain OFF. 5. At no time should two LEDs be on. The states of the Buttons and LEDs are described in Ta

See explaination

Explanation:

int RED=10; int BLUE=11; int GREEN=12; int BUTTON1=8; int BUTTON2=9; void setup() { pinMode(RED, OUTPUT); pinMode(BLUE, OUTPUT); pinMode(GREEN, OUTPUT); pinMode(BUTTON1, INPUT); pinMode(BUTTON2, OUTPUT); } void loop() { int BTN1_STATE=digitalRead(BUTTON1); int BTN2_STATE=digitalRead(BUTTON2); if(BTN1_STATE==HIGH) { digitalWrite(BLUE, HIGH); delay(1000); // Wait for 1 second digitalWrite(BLUE, LOW); } if(BTN2_STATE==HIGH) { digitalWrite(RED, HIGH); delay(4000); // Wait for 4 seconds digitalWrite(RED, LOW); } if(BTN1_STATE==HIGH && BTN2_STATE==HIGH) { digitalWrite(GREEN, HIGH); delay(2000); // Wait for 2 second digitalWrite(GREEN, LOW); } }

energy can cross the boundaries of a closed system in the form of heat and mass

explanation: