Engineering, 15.04.2020 20:45, blondie02

A liquid-dominated geothermal plant with a single flash separator receives water at 400 oF. The separator pressure is 150 psia. The direct connect condenser operates at 5 psia. The turbine has a polytropic efficiency of 0.75. For a cycle output of 10 MW, find (a) the steam mass flow rate, in pounds mass per hour, (b) the well water mass flow rate, in pounds mass per hour, (c ) the reinjected brine mass flow rate in pounds mass per hour, (d) the cycle efficiency, and € the cooling water mass flow rate if such water is available at 80 oF. You can ignore the pump work.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:20, moneywaydaedae

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Do you know the correct answer?

A liquid-dominated geothermal plant with a single flash separator receives water at 400 oF. The sepa...