Engineering, 15.04.2020 19:03, ihatemath143

A smooth vertical steel tube carries water at a pressure of 10 bars. Saturated liquid water is pumped into the D=0.05 diameter tube at its bottom end (x=0) with a mean velocity of um=0.005 m/s. The tube is exposed to combusting pulverized coal, providing a uniform heat flux of q''=2000 W/m^2 . Determine the tube wall temperature and the quality of the flowing water at x=15 m. Assume Gs, f=1.

Saturated water, liquid (10 bars): Tsat = 452.8 K, \rho = 887.3 kg/m3 , hfg =2014 kJ/kg, \mu L =149.4 × 10- 6 N⋅s/m2 , kL = 0.6766 W/m⋅K, Prl Prl= 0.979;

Water vapor: \rho v = 5.094 kg/m3 , µv = 14.95 × 10-6 N⋅s/m2 , kv = 0.03353 W/m⋅K, Prv = 1.149.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

Engineering, 04.07.2019 19:10, kelseiroll9759

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

continue

Engineering, 04.07.2019 19:20, holaadios222lol

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Answers: 1

continue

Do you know the correct answer?

A smooth vertical steel tube carries water at a pressure of 10 bars. Saturated liquid water is pumpe...