Engineering
Engineering, 15.04.2020 18:22, thedragontale1020

Two production methods are being compared. One manual and the other automated. The manual method produces 10 pc per hour and requires one worker at $ 15.00 per hour. Fixed cost of the manual method is $ 5,000 per year. The automated method produces 25 pc per hour, has a fixed cost of $ 55,000 per year, and a variable cost of $ 4.50 per hour. Determine the Break – Even Point (BEP) for the two methods; that is, determine the annual production quantity at which the two methods have the same annual cost. Ignore the cost of material used in the two methods

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, mm016281
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
image
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
image
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
image
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Do you know the correct answer?
Two production methods are being compared. One manual and the other automated. The manual method pro...

Questions in other subjects:

Konu
Mathematics, 20.05.2020 23:01
Konu
Biology, 20.05.2020 23:01
Konu
Social Studies, 20.05.2020 23:01
Konu
Mathematics, 20.05.2020 23:01