Engineering, 15.04.2020 16:56, OzzyDaGod
(a1)5.2 mm diameter cylindrical aluminum alloy rod is subjected to tension-compression cycling along its axis. Compute the maximum and minimum LOADS that correspond to a stress amplitude of 140 MPa and a mean stress of 35 MPa. (b) List and explain four measures that may be taken to increase the fatigue resistance of a given metallic component. The bulk of the specimen, the loading conditions and the temperature CANNOT BE CHANGED, only the specimen surface can. (25)
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 03.07.2019 23:20, abbz13
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Do you know the correct answer?
(a1)5.2 mm diameter cylindrical aluminum alloy rod is subjected to tension-compression cycling along...
Questions in other subjects:
Geography, 30.07.2019 05:00
