Engineering, 15.04.2020 04:17, hardyfombu

It is desired to produce an aligned carbon fiber-epoxy matrix composite having a 0.11 volume fraction of fibers. Calculate (a) the critical fiber length, and (b) the longitudinal strength of the composite (in MPa), assuming the following: (1) the average fiber diameter is 0.014 mm, (2) the average fiber length is 5.2 mm, (3) the fiber fracture strength is 3.2 GPa, (4) the fiber-matrix bond strength is 80 MPa, (5) the matrix stress at fiber failure is 16.5 MPa, (6) the matrix tensile strength is 71 MPa. (a) mm (b) MPa

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

Engineering, 04.07.2019 19:20, zoebtharpe

Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection

Answers: 1

continue

Engineering, 04.07.2019 19:20, sashajayne8260

Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.

Answers: 3

continue

Do you know the correct answer?

It is desired to produce an aligned carbon fiber-epoxy matrix composite having a 0.11 volume fractio...