Engineering, 15.04.2020 02:58, micheleflorack
A resonant six-turn loop of closely spaced turns is operating at 50 MHz. The radius of the loop is λ/30, and the loop is connected to a 50-ohm transmission line. The radius of the wire is λ/300, its conductivity is σ = 5.7 × 107 S/m, and the spacing between the turns is λ/100. Determine the:
a. the directivity of the antenna (in dB)
b. radiation efficiency taking into account the proximity effects of the turns
c. reflection efficiency gain of the antenna (in dB)
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, tobyhollingsworth178
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20, yasyyas646646
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
Engineering, 04.07.2019 19:10, jrcspiderman2003
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
Do you know the correct answer?
A resonant six-turn loop of closely spaced turns is operating at 50 MHz. The radius of the loop is λ...
Questions in other subjects:
Mathematics, 21.03.2020 04:47
