Engineering, 14.04.2020 22:12, TerrieRichard8405

3 4 ‐ in. UNF bolt with rolled threads is used in a joint having a soft gasket for which the clamped member stiffness is only half the bolt stiffness. The bolt initial tension corresponds to F i = 16,000 d , d in inches. During operation, there is an external separating force that fluctuates between 0 and P . For this application, there is negligible bending of the bolts. Estimate the maximum value of P that would not cause eventual bolt fatigue failure. Estimate the maximum value of P that would not cause joint separation. [Ans.: (a) Approximately 5600 lb, (b) 36,000 lb]

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, michellerosas

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Engineering, 04.07.2019 18:20, sarah7984

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

continue

Do you know the correct answer?

3 4 ‐ in. UNF bolt with rolled threads is used in a joint having a soft gasket for which the clamped...