Engineering, 14.04.2020 23:38, charlettethomap7e9st

A corroded metal gusset plate was found on a bridge. It was estimated that the original area of the plate was 750 cm2 and that approximately 2.5 kg had corroded away during use. Assuming a corrosion penetration rate of 0.5 mm/year for this metal, estimate the time since construction of the bridge. The density of the alloy is 10 g/cm3. HINT: Weight should be entered in MILLIGRAMS.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Do you know the correct answer?

A corroded metal gusset plate was found on a bridge. It was estimated that the original area of the...