Engineering, 14.04.2020 19:17, shayshay4352

The lid on a pressure vessel is held down with 10 bolts that pass through the lid and a flange on the pressure vessel (similar to example 8-4, in the text). The bolts are secured with nuts under the flange. There are no washers. The thickness of the lid is 28 mm and the thickness of the flange is 28 mm. The vessel and lid are both made of steel. The vessel is pressurized to 8 MP a, and the area of the lid exposed to the pressure is 31.4e3 mm². The modulus of elasticity is 207 GPa. The chosen bolts are ISO property class 9.8 and are coarse-pitch series, M12.
Find the external load, P, on each bolted joint.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

Do you know the correct answer?

The lid on a pressure vessel is held down with 10 bolts that pass through the lid and a flange on th...