Engineering, 14.04.2020 18:25, ashleyuchiha123
An inspector must inspect a production batch of 8,000 parts using a gaging method. If the actual fraction defect rate in the batch is 0.02, and the inspector’s accuracy is given by p1 =0.98 and p2 = 0.78, Determine:
a. the number of defects the inspector can be expected to report.
b. the expected number of Type I and Type II errors the inspector will make.
c. What is the expected fraction defect rate that the inspector will report at the end of the inspection task?
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, siri5645
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Do you know the correct answer?
An inspector must inspect a production batch of 8,000 parts using a gaging method. If the actual fra...
Questions in other subjects:
English, 08.02.2021 04:10
Social Studies, 08.02.2021 04:10
