Engineering, 10.04.2020 18:19, tahmidtaj150
HW6.13. Add up (just) the numbers in a list If you have a list consisting of just numbers, then you can add all of the values in the list using the sum() function. If your list consists of some numbers and some values of other types (e. g., lists, strings, sets), the sum() function will fail. In this question, we're asking you to write a function that will sum all of the numbers in a list, ignoring the non-numbers. The function below takes one parameter: a list of values (value_list) of various types. The recommended approach for this: (1) create a variable to hold the current sum and initialize it to zero, (2) use a for loop to process each element of the list, (3) test each element to see if it is an integer or a float, and, if so, add its value to the current sum, (4) return the sum at the end. student. py 1 - Hef sum_lengths(value_list): 2 # Implement your function here. Be sure to indent your code block! Restore original file
Answers: 3
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
HW6.13. Add up (just) the numbers in a list If you have a list consisting of just numbers, then you...
Mathematics, 02.08.2021 01:20
Mathematics, 02.08.2021 01:20
English, 02.08.2021 01:20
History, 02.08.2021 01:20
Biology, 02.08.2021 01:20
Geography, 02.08.2021 01:20
Mathematics, 02.08.2021 01:20