Engineering, 09.04.2020 23:38, hayden6920

A steam turbine is used to generate electricity at a pulp and paper manufacturing plant. Superheated steam at 10 MPa and 780 K enters the turbine with a mass flow rate of 38.7 kg/sec. The steam exits the turbine at 318 K with a quality of 0.88. The turbine operation can be assumed to be adiabatic, and the changes in both the kinetic and potential energies of the entering and exiting steam are negligible.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 23:20, abbz13

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

continue

Engineering, 04.07.2019 19:10, ultimateapes

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

Answers: 2

continue

Engineering, 06.07.2019 03:20, harleyandpope90

Aparticle moves along a straight line such that its acceleration is a=(4t^2-2) m/s, where t is in seconds. when t = 0, the particle is located 2 m to the left of the origin, and when t = 2, it is 20 m to the left of the origin. determine the position of the particle when t=4s.

Answers: 1

continue

Engineering, 06.07.2019 03:30, aminsaad4253

Abrayton cycle operates with a regenerator on the air-standard with properties evaluated at 400 k. the tem- perature of the air entering the compressor is 350k while the temperature of the air exiting the compressor is 600 k. the temperature of the air entering the turbine is 1600 k. the overall cycle produced 600 kj/kg of net work out. assuming a regenerator effectiveness of 0.8, what is the temperature of the air before heat addition (combustion)? draw this process on a t - s diagram

Answers: 3

continue

Do you know the correct answer?

A steam turbine is used to generate electricity at a pulp and paper manufacturing plant. Superheated...