Engineering, 08.04.2020 04:26, krystalhurst97

If we have silicon at 300K with 10 microns of p-type doping of 4.4810^18/cc and 10 microns of n-type doping at 1000 times less than the p-type doping, what is the resistance in ohms outside the depletion region on the n side of the junction. Use three significant digits and fixed point notation. The diode is square with an edge length of 60 microns, with a bias of 0.44V. Assume p and n mobilities are 500 & 1500 cm^2/(Vs) respectively. Correct 24.9

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Do you know the correct answer?

If we have silicon at 300K with 10 microns of p-type doping of 4.48*10^18/cc and 10 microns of n-typ...