Engineering, 08.04.2020 01:32, jacckiie5176

A three-phase, 60 Hz, synchronous wound rotor machine acting as generator is observed to have a terminal voltage of 460 Vrms and a magintude terminal current of 140 Arms at a power factor of 0.88 lagging. The field current under this operation is 50 A. The synchronous reactance is 1.0 and you can assume the armature resistance to be negligible. Analytically find:

(a) 10pts. The internal voltage of the machine
(b) 10pts. The magnitude of the field-to-armature mutual inductance.
(c) 10pts. The electrical power output in both kW and HP.
(d) 5pts. Draw the phasor diagram of the internal voltage, the machine line voltage drop, and the terminal voltage of the machine.
(e) 5pts. What is the electrical phase angle difference value between the magnetic axis of Or and Ff?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

Engineering, 04.07.2019 18:20, moneywaydaedae

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

continue

Engineering, 04.07.2019 18:20, sanchez626

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

continue

Engineering, 04.07.2019 19:10, nbunny7208

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

continue

Do you know the correct answer?

A three-phase, 60 Hz, synchronous wound rotor machine acting as generator is observed to have a term...