Engineering, 07.04.2020 21:50, lashaaungas

Which shows the correct substitution of the values a, b, and c from the equation –2 = –x + x2 – 4 into the quadratic formula? Quadratic formula: x = StartFraction negative b plus or minus StartRoot b squared minus 4 a c EndRoot Over 2 a EndFraction x = StartFraction negative (negative 1) plus or minus StartRoot (negative 1) squared minus 4 (1)(negative 4) EndRoot Over 2(1) EndFraction x = StartFraction negative 1 plus or minus StartRoot 1 squared minus 4 (negative 1)(negative 4) EndRoot Over 2(negative 1) EndFraction x = StartFraction negative (negative 1) plus or minus StartRoot (negative 1) squared minus 4 (1)(negative 4) EndRoot Over 2(1) EndFraction x = StartFraction negative (negative 1) plus or minus StartRoot (negative 1) squared minus 4 (1)(negative 2) EndRoot Over 2(1) EndFraction

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, breannaasmith1122

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Engineering, 04.07.2019 19:10, jrcspiderman2003

Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?

Answers: 3

continue

Do you know the correct answer?

Which shows the correct substitution of the values a, b, and c from the equation –2 = –x + x2 – 4 in...