Engineering, 07.04.2020 20:16, jurnee77
Assign rateMPH with the corresponding rate in miles per hour given a user defined rateKPH, which is a rate in kilometers per hour. Use the local function KilometersToMiles. Your Solution g function distanceMiles = CalculateDistance(timeHours, rateKPH) % timeHours: Time in hours A % rateKPH: Rate in kilometers rateMPH = rateKPH; % Call KilometersToMiles function (below) to assign % rateMPH with the corresponding speed in miles per hour distanceMiles = rateMPH * timeHours; end % Do not modify the function below function milesValue = KilometersToMiles(KilometersValue) milesValue = KilometersValue * 0.6213712; 15 end Code to call your function when you click Run Calculate distance(1, 40)
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10, koolgurl2003
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Do you know the correct answer?
Assign rateMPH with the corresponding rate in miles per hour given a user defined rateKPH, which is...
Questions in other subjects:
