Operated now under a slightly new process: a. 1000 kg of coffee beans are loaded into the mixing tank at a time and the beans are 98.5 wt% coffee solids and 1.5 wt% caffeine. b. 90% of the caffeine in the raw beans is removed with the caffeine loaded solvent stream from the mixing tank. c. The rotary dryer removes 95 wt% of the remaining solvent in the decaffeinated coffee beans but does not remove any additional caffeine. d. 80% of the solvent fed to the mixing tank leaves in the caffeine loaded solvent stream.

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.