Engineering, 06.04.2020 18:33, samanthasheets8006

A tank with a volume of 8 m3 containing 4 m3 of 20% (by volume) NaOH solution is to be purged by adding pure water at a rate of 3 m3/h. The solution leaves the tank at a rate of 2 m3/h. When the tank is full, the solution leave the tank at the same inlet flow of 3 m3/h. Assume perfect mixing. Specific gravity of pure NaOH is 1.22. Determine the time necessary to purge 95% of the NaOH by mass from the tank.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, genyjoannerubiera

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Engineering, 04.07.2019 19:10, nayi2002

The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object

Answers: 1

continue

Do you know the correct answer?

A tank with a volume of 8 m3 containing 4 m3 of 20% (by volume) NaOH solution is to be purged by add...