Engineering, 04.04.2020 04:29, KayBJ2005
The (solid) steel shaft (with G = 10.4 × 103 ksi) is made from two segments with different diameters: dAC = 0.5 in and dCB = 1 in. If the shaft is fixed at its ends A and B and subjected to a torque of 500 lb-ft at D, determine the maximum shear stress in the shaft.
Answers: 3
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 19:10, 592400014353
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
The (solid) steel shaft (with G = 10.4 × 103 ksi) is made from two segments with different diameters...
Mathematics, 22.05.2021 03:10
Health, 22.05.2021 03:10
Mathematics, 22.05.2021 03:10
Mathematics, 22.05.2021 03:10
Mathematics, 22.05.2021 03:10