Engineering, 04.04.2020 03:32, brittanyskipper1738
A 30-ft tall drop tower is being used to study the shape of water droplets as they fall through air. A camera is to be carried by a cam-operated linkage which will track the droplets motion from the 7-ft to the 9-ft point in its fall (measured from release point at the top of the tower). The drops are released every 0.5 sec. Every drop is to be filmed. Design a cam and follower which will track these droplets, matching their velocities and accelerations in the 1-ft filming window. Consider acceleration due to gravity, g = 32.2 ft/sec2 . Note that the follower is operating between 7-ft to the 9-ft but it follows the water droplets exactly within the 1-ft filming window.
Answers: 3
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
A 30-ft tall drop tower is being used to study the shape of water droplets as they fall through air....
Mathematics, 24.05.2021 17:30
Mathematics, 24.05.2021 17:30
Mathematics, 24.05.2021 17:30
Law, 24.05.2021 17:30
Mathematics, 24.05.2021 17:30
Mathematics, 24.05.2021 17:30