Engineering
Engineering, 04.04.2020 01:01, barclaybarnes07

A complete-mixed suspended growth reactor, without a clarifier and recycle, is used to treat flow containing only soluble organic substances. The influent BOD and COD are as follows:Influent BOD: 200 mg/L and COD: 450 mg/LIf the effluent dissolved BOD concentration is 2 mg/L, and the effluent volatile suspended solids concentration is 100 mg/L, please determine:a. The observed yield in terms of g VSS/g BOD, g VSS/g COD, b. The effluent total sCOD concentration including nonbiodegradable dissolved CODc. The fraction of the influent BOD that is oxidized to CO2 and H2OAssume the biodegradable COD/BOD ratio is 1.6 and 1.42 g O2 equivalent/ g biomass.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
image
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
image
Engineering, 04.07.2019 18:20, mjcbs21
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
image
Engineering, 04.07.2019 18:20, cxttiemsp021
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Do you know the correct answer?
A complete-mixed suspended growth reactor, without a clarifier and recycle, is used to treat flow co...

Questions in other subjects:

Konu
Geography, 10.11.2020 20:30
Konu
Mathematics, 10.11.2020 20:30
Konu
Chemistry, 10.11.2020 20:30
Konu
Physics, 10.11.2020 20:30