3. Refer to the circuit shown in Figure 30-10. In this circuit, the jog button has been con-
nected incorrectly. The normally closed section has been connected in parallel with the
run push button and the normally open section has been connected in series with the
holding contacts. Explain how this circuit operates.

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false