Engineering, 02.04.2020 23:05, rntaran2002

Show how to determine the heat duty of the double-pipe heat exchanger from experimental data by performnig an energy balance on one part of the system at the frst set of flow rates. Sketch the system and draw a dashed line around the part for the system on which you will perform th eenergy balance. Carry out the calculation for the data you recorded on the first line of your data tableHeat duty = WData Table: 2 MinutesInner tube 1 (inlet) T hot, in (C) = 40.1Inner tube 1 (ourlet) T hot, out (C) = 37.5Outlet tube 2 (inlet) T cold, in (C) = 28Outlet tube 2 (outlet) T cold, out (C) = 28.3

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, sarahgrindstaff123

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

continue

Engineering, 04.07.2019 18:10, samanthabutryn

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

continue

Engineering, 04.07.2019 18:20, luisgonz5050

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

continue

Engineering, 04.07.2019 19:10, nayi2002

The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object

Answers: 1

continue

Do you know the correct answer?

Show how to determine the heat duty of the double-pipe heat exchanger from experimental data by perf...