Engineering, 31.03.2020 02:45, lexi8938

Although not explicitly discussed in the chapter, packet size would seem to have an impact on transmission time. Discuss whether or not this is true and explain why. Specifically compare the concept of the number of bits that constitute the data portion of the packet and the number of bits that constitute the address portion of the packet. Remember that the address is overhead and it has an impact on data transmission rates. Offer a comprehensive example comparing packet sizes and resulting transmission times. For example, look at some of your e-mail messages and compare the number of bytes that constitute the message with the number of bytes for the address. Compute the results for several e-mails and give your conclusions.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Engineering, 04.07.2019 19:10, brid7931

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

continue

Engineering, 04.07.2019 19:10, kelseiroll9759

Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.

Answers: 1

continue

Do you know the correct answer?

Although not explicitly discussed in the chapter, packet size would seem to have an impact on transm...