Engineering, 31.03.2020 01:05, clapoint2003p3chnu

Cite the phases that are present and the phase compositions for the following alloys: (a) 90 wt% Zn-10 wt% Cu at 400C (750F) (b) 75 wt% Sn-25 wt% Pb at 175C (345F) (c) 55 wt% Ag-45 wt% Cu at 900C (1650F) (d) 30 wt% Pb-70 wt% Mg at 425C (795F) (e) 2.12 kg Zn and 1.88 kg Cu at 500C (930F) (f) 37 lbm Pb and 6.5 lbm Mg at 400C (750F) (g) 8.2 mol Ni and 4.3 mol Cu at 1250C (2280F) (h) 4.5 mol Sn and 0.45 mol Pb at 200C (390F)

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:20, kendrawalraven

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Do you know the correct answer?

Cite the phases that are present and the phase compositions for the following alloys: (a) 90 wt% Zn-...