This problem demonstrates aliasing. Generate a 512-point waveform consisting of 2 sinusoids at 200 and 400-Hz. Assume a sampling frequency of 1 kHz. Generate another waveform containing frequencies at 200 and 900-Hz. Take the Fourier transform of both waveforms and plot the magnitude of the spectrum up to fs/2. Plot the 2 spectra superimposed, but in different colors to highlight the additional peak due to aliasing at 100-Hz.

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.