Engineering, 30.03.2020 19:31, magicallyhello
G Measurements are made at two depths. The total head is 100 cm at depth 0.2 m and is 250 cm at depth 1.2 m, respectively. The soil moisture content and hydraulic conductivity are modeled by Campbell equations ( Hb 50 cm, n 0.33 , and =1). If the soil moisture flux between these two points is 0.04 (cm/day) downward, calculate the saturated hydraulic conductivity (cm/day).
Answers: 1
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
G Measurements are made at two depths. The total head is 100 cm at depth 0.2 m and is 250 cm at de...
Biology, 06.05.2021 14:00
English, 06.05.2021 14:00
English, 06.05.2021 14:00
Mathematics, 06.05.2021 14:00
Health, 06.05.2021 14:00