Engineering, 30.03.2020 16:16, 22katelynfrankouqqrb

Wet steam at 15 bar is throttled adiabatically in a steady-flow process to 2 bar. The resulting stream has a temperature of 130°C. What are the temperature and quality of the wet steam? Calculate the change of entropy of the steam as a result of the process. It is important to note that a throttling process is where the change of enthalpy is zero (that is, AH = 0). Temperature ~ 198 °C and the quality of 96.76%. AS = 0.8708 kJ/kg-K

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

Do you know the correct answer?

Wet steam at 15 bar is throttled adiabatically in a steady-flow process to 2 bar. The resulting stre...