Engineering, 28.03.2020 02:58, samara49

Consider a rectangular wing mounted in a low-speed wind tunnel. The wing model completely spans the test section so that the flow is essentially two-dimensional. If the wing has an NACA 4415 airfoil section and a chord of 0.3 meters, calculate the lift, drag, and pitching moment about the quarter-chord per unit span when the pressure, temperature, and velocity are 1 atm., 303K, and 42 m/sec., respectively. The angle of attack is 8°. What is the moment about the leading edge for these conditions?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:20, moneywaydaedae

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

continue

Engineering, 04.07.2019 18:20, jessie8022

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

continue

Do you know the correct answer?

Consider a rectangular wing mounted in a low-speed wind tunnel. The wing model completely spans the...