Engineering
Engineering, 27.03.2020 06:00, PlzNoToxicBan

Air enters a compressor at 100 kPa and 25 ⁰C. It is compressed to 2 MPa and exits the compressor at 540 K. The compressor is at a higher temperature than the surroundings, therefore 140 kJ is lost to the surroundings (as heat) per kg of air flowing through the compressor. You can neglect the kinetic and potential energy. (a) What is the reversible work? (answer in kJ/kg, as a negative number) (b) What is the irreversibility rate? (answer in kJ/kg)

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
image
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
image
Engineering, 04.07.2019 19:10, jimena15
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Do you know the correct answer?
Air enters a compressor at 100 kPa and 25 ⁰C. It is compressed to 2 MPa and exits the compressor at...

Questions in other subjects:

Konu
History, 28.04.2021 01:00