Engineering, 27.03.2020 04:06, princessbri02
Or a bronze alloy, the stress at which plastic deformation begins is 267 MPa and the modulus of elasticity is 115 GPa. (a) What is the maximum load (in N) that may be applied to a specimen having a cross-sectional area of 164 mm2 without plastic deformation
Answers: 3
(equation 1)
. So,![A[m^{2}]=A[mm^{2} ](\frac{1 m}{1000 mm}) ^{2}\\A[m^{2}]=164 mm^{2}(\frac{1 m}{1000 mm})^{2} \\A[m^{2}]=0.000164 m^{2}](/tpl/images/0566/9014/f17f8.png)
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10, lillygrl100
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Do you know the correct answer?
Or a bronze alloy, the stress at which plastic deformation begins is 267 MPa and the modulus of elas...
Questions in other subjects:
