Engineering, 26.03.2020 20:02, 8336622

14 (bonus). You have a material of a length of 10mm and a diameter of 0.2 mm. When you apply a tensile 4 force of 1.110 N, this material elongates to the length of 15mm. You measure a diameter of the elongated sample and you find that it is now 0.16 mm. Assuming the deformation remains elastic, calculate Poisson ratio and Young’s modulus of this material (in GPa)14 (bonus). You have a material of a length of 10mm and a diameter of 0.2 mm. When you apply a tensile 4 force of 1.110 N, this material elongates to the length of 15mm. You measure a diameter of the elongated sample and you find that it is now 0.16 mm. Assuming the deformation remains elastic, calculate Poisson ratio and Young’s modulus of this material (in GPa)

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Do you know the correct answer?

14 (bonus). You have a material of a length of 10mm and a diameter of 0.2 mm. When you apply a tensi...