Engineering, 26.03.2020 18:16, Kelshonti15

(a) If a rod of 1025 steel 0.5 m (19.7 in.) long is heated from 20°C to 80°C (68°F to 176°F) while its ends are maintained rigid, determine the type and magnitude of stress that develops. Assume that at 20°C the rod is stress-free. Assume positive stress for tension and negative for compression. (b) What will be the stress if a rod 1 m (39.4 in.) long is used? (c) If the rod in part (a) is cooled from 20°C to −10°C (68°F to 14°F), what type and magnitude of stress will result? Put positive stress for tension and negative for compression.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

Engineering, 04.07.2019 18:20, rocio5649

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa. s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

continue

Engineering, 04.07.2019 19:10, pjgolden04

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

continue

Do you know the correct answer?

(a) If a rod of 1025 steel 0.5 m (19.7 in.) long is heated from 20°C to 80°C (68°F to 176°F) while i...