Use the same conditions as in Example 20.1-1 except that the solid is a rectangular block 10.16 mm thick in the x direction, 7.62 mm thick in the y direction, and 10.16 mm thick in the z direction, and diffusion occurs at all six faces. Calculate the concentration at the midpoint after 10 h.

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false