Engineering, 25.03.2020 16:52, Christyy1837

Point A needs to send a 50 kb file to point B. Each packet will contain L = 1000 bits of data. The distance between Points A and B is d = 50 km. The propagation velocity is V = 2 x 108 m/sec. The transmit data rate is N = 10 Mbps. Sliding Window flow control is used with a window size (W) of five. Both points A and B have buffers large enough to handle the sliding window protocol.

How long would it take to transfer the file from point A to point B?

a. Time to transmit one frame:
b. Time to transmit W frames:c. Time to propagate last bit of the first frame from A to B:
d. Time to propagate ACK frame from B to A:
e. Total time to transmit and acknowledge first frame:
f. Time to transfer file:

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 12:10, Ryantimes2

On a average work day more than work place firs are reorted

Answers: 1

continue

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, abdirahmansoloman

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

continue

Engineering, 04.07.2019 18:10, michellerosas

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

continue

Do you know the correct answer?

Point A needs to send a 50 kb file to point B. Each packet will contain L = 1000 bits of data. The d...