Engineering
Engineering, 24.03.2020 21:30, curiouscadencee

A pumped storage facility uses a 6.6 kV, 60 Hz, 4200 kVA, 3360 kW, 10 pole, three-phase synchronous machine, with a synchronous reactance of 1.13 pu. Assume a cylindrical rotor. The hydro turbine is rated 3500 kW. All losses are neglected. 1. Hydro generator capabilities (a) Compute the hydro turbine speed to obtain a 60 Hz output; the range of the power factor of the generator; the rated line current. Compute the value of synchronous reactance in ohm. (b) Draw the per-phase equivalent circuit. Assume Y-connected generator windings. Present and explain the functions of the hydro turbine and generator controls.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
image
Engineering, 04.07.2019 18:10, 19deleonl
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
image
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
image
Engineering, 04.07.2019 19:10, nayi2002
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
Do you know the correct answer?
A pumped storage facility uses a 6.6 kV, 60 Hz, 4200 kVA, 3360 kW, 10 pole, three-phase synchronous...

Questions in other subjects: