Engineering, 24.03.2020 05:33, yasiroarafat12

Write a program with total change amount as coin types are dollars, quarters, dimes, nickels, and pennies. Use singular and plural coin names as an integer input that outputs the change using the fewest coins, one coin type per line. The appropriate, like 1 penny vs. 2 pennies. Ex: If the input is: (or less), the output is: no change Ex: If the input is 45, the output is: 1 quarter 2 dimes Your program must define and call the following function. Positions 0-4 of coinVals should contain the number of dollars, quarters, dimes, nickels, and pennies, respectively void ExactChange (int userTotal, int coinVals []) Note: This is a lab from a previous chapter that now requires the use of a function. LAB 6.31.1: LAB: Exact change - functions 0/10 ACTIVITY main. c Load default template... 1 #include /Define your function here */ 4 5 int main(void) 7 Type your code here. Your code must cal1 the function. 8 return 1 11

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:20, cxttiemsp021

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

continue

Engineering, 04.07.2019 19:20, mariahmimibrooks

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.

Answers: 2

continue

Do you know the correct answer?

Write a program with total change amount as coin types are dollars, quarters, dimes, nickels, and pe...