Engineering
Engineering, 24.03.2020 03:34, cedricevans41p4j3kx

An engineer is going to redesign an ejection seat for an airplane. The seat was designed for pilots weighing between 130 lb and 171 lb. the new population of pilots has normally distributed weights with a mean of 137 lb and a standard deviation of 27.7 lb.
A.) if a pilot is randomly selected, find the probability that his weight is between 150 lb and 201 lb.
The probability is approximately. (round to four decimal place as needed.)
B.) If 39 different pilots are randomly selected, find the probability that their mean weight is between 150 lb and 201 lb.
The probability is approximately. (round to four decimal place as needed.)
C) When redesigning the ejection seat which probability is more relevant
Part A or Part B

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
image
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
image
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
image
Engineering, 04.07.2019 19:20, brae72
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
Do you know the correct answer?
An engineer is going to redesign an ejection seat for an airplane. The seat was designed for pilots...

Questions in other subjects:

Konu
History, 22.02.2021 20:10
Konu
Mathematics, 22.02.2021 20:10
Konu
Mathematics, 22.02.2021 20:10
Konu
Mathematics, 22.02.2021 20:10