Engineering, 23.03.2020 21:40, palomaresmitchelle

For steels, we can assume the endurance limit measured by rotating beam tests is the 50% of the ultimate tensile strength (UTS) as long as the UTS is equal to or less than 200 ksi (1400 MPa).True/False

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Engineering, 04.07.2019 18:20, kendrawalraven

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

continue

Engineering, 04.07.2019 19:20, holaadios222lol

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Answers: 1

continue

Engineering, 06.07.2019 05:10, gfdsgfd5654

Comment on the effect of lubrication of the punch surfaces on the limiting drawing ratio in deep drawing.

Answers: 3

continue

Do you know the correct answer?

For steels, we can assume the endurance limit measured by rotating beam tests is the 50% of the ulti...