Engineering
Engineering, 22.03.2020 21:36, zachzach28280

Match the words with their definitions
- Load-bearing wall
- footings
- Microlam
- Gable
- Joist
- OSB
- Particleboard
- Pitch
- Point load
- Rebar
- Backfill

-Wooden 2 X 8's, 10's, or 12's that run parallel to one another and support a floor or ceiling, and supported in turn by larger beams, girders, or bearing walls.
- A point where a bearing/structural weight is concentrated and transferred to the foundation.
- Includes all exterior walls and any interior wall that is aligned above a support beam or girder
- Plywood substitute made of coarse sawdust that is mixed with resin and pressed into sheets.
- The replacement of excavated earth into a trench around or against a basement/crawl space foundation wall.
- Continuous 8m" or 10" thick concrete pad installed before and supports the foundation wall or monopost
- Ribbed steel bars installed in foundation concrete walls, footers and poured in place concrete structures designed to strengthen concrete.
- The end, upper, triangular area of a home, beneath the roof
- A manufactured 4X8 wood panel made out of 1-2 wood chips and glue. Often used as a substitute for plywood.
- The incline slope of a roof or the ratio of the total width of a house.
- A manufactured structual wood beam. It is constructed of pressure and adhesive wood strands of wood.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
image
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
image
Engineering, 04.07.2019 19:20, qurreab26
A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.
Answers: 1
image
Engineering, 06.07.2019 05:10, amohammad6
Air at 27°c and at atmospheric pressure flows over a fat plate at a speed of 2 m/sec. if the plate is maintained at 93°c, calculate the heat transfer for unit wid h of the plate; assuming the length of the plate along the flow of air is 2 metres.
Answers: 3
Do you know the correct answer?
Match the words with their definitions
- Load-bearing wall
- footings
- Microlam

Questions in other subjects:

Konu
Social Studies, 01.09.2021 02:40