Purity of copper films by evaporation and sputtering.
(a) Discuss three factors that af...
Engineering, 21.03.2020 08:24, Isabella1319
Purity of copper films by evaporation and sputtering.
(a) Discuss three factors that affect the purity of copper films when deposited by evaporation from a tungsten filament.
(b) Discuss three factors that affect the purity of copper films when deposited by argon sputtering of a copper target.
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:20, moneywaydaedae
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 19:10, kelseiroll9759
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
Engineering, 06.07.2019 02:30, chickennbutt0730
On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)
Answers: 2
Do you know the correct answer?
Questions in other subjects:
Mathematics, 04.11.2020 23:10
