Engineering, 21.03.2020 11:56, akitchen10

The center of a large bar magnet is z = 25 cm from a thin plate of high resistance material 12 cm long, 2.5cm high, and 0.1 cm thick that is connected to a 240 V power supply whose internal resistance is negligible. The bar magnet is perpendicular to the plate. The mobility of charge canners in the thin plate is 3.8 x 10^(-4) (m/s)/(V/m), and the number density of singly charged charge carriers is 3.6 x 10^23 m^(-3). A voltmeter connected precisely vertically across the A thin plate and reads +1.2 x 10^(-5) V. A low-resistance ammeter is in series with the rest of the circuit.
(a) Are the charge carriers electrons or holes?
(b) What is the magnetic deplete moment of the maggots? Include unit. (Enter the magnitude.)
(c) What does the ammeter read, including sign?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 06.07.2019 02:30, sandy2597

Precipitation hardening can be achieved in many light alloys by a three-step heat treatment. what is carried out and what is the purpose at each step? why is such a treatment necessary based on the nucleation and growth theory of phase transformation. compare this treatment with tempering martensite for carbon steels (similarities and differences).

Answers: 1

continue

Do you know the correct answer?

The center of a large bar magnet is z = 25 cm from a thin plate of high resistance material 12 cm lo...