Engineering, 20.03.2020 03:20, michaeladkins1979

Which one of the following statements is true? Justify, explain every the given option.

(a) The recrystallization temperature of brass is higher than the recrystallization temperature of copper.
(b) The recrystallization temperature of bronze is lower than the recrystallization temperature of
(c) Recrystallization cannot occur at room temperature.
(d) According to the Hall-Petch equation, Ostwald ripening follows the empirical rule: copper. where n and K are material-dependent constants, / denotes time, d denotes average grain diameter at time t, and do denotes initial average grain diameter.
(E)When a cold worked material is annealed, the microstructure at time 12 is coarser than the microstructure at time ti, if /2> .

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

Do you know the correct answer?

Which one of the following statements is true? Justify, explain every the given option.

...