Engineering
Engineering, 19.03.2020 17:00, smallblueberry

Recrystallization Incorrect. During the recrystallization of a cold-worked material, which of the following statement(s) is (are) true? Some of the internal strain energy is relieved.

a. The thermal conductivity is recovered to its pre cold-worked state
b. All of the internal strain energy is relieved.
c. The metal becomes more ductile, as in its precold-worked state.
d. There is some reduction in the number of dislocations
e. The electrical conductivity is recovered to its precold-worked state
f. There is a significant reduction in the number of dislocations, to approximately the number found in the precold-worked state
g. Grains with high strains are replaced with new, unstrained grains

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
image
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Do you know the correct answer?
Recrystallization Incorrect. During the recrystallization of a cold-worked material, which of the fo...

Questions in other subjects:

Konu
Social Studies, 22.11.2019 19:31