Engineering, 19.03.2020 01:40, omarabady

Design a simple compound gearbox for an exact 22:1 ratio, using a compound gearset so that no ratio exceeds 2.9:1. Choose the number of teeth on each gear such that the gears are all approximately the same size and the pinions are all approximately the same size (no more than a 10 tooth difference between all the gears, no more than a 5 tooth difference between all the pinions, and all gears should have at least 20 teeth). The gearbox should have an input and output shaft on opposite sides of the gearbox with all gears in proper mesh. (Hint: you will need at least 3 gear pairs.)

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Do you know the correct answer?

Design a simple compound gearbox for an exact 22:1 ratio, using a compound gearset so that no ratio...