Engineering, 17.03.2020 04:55, ella3714

A parallel plate capacitor has a separation of 2x10 m and free space between the plates. A 10 V battery is connected across the plates and then removed without disturbing the charge on the plates. The plates are now allowed to come together toa separation of 10% m without disturbing the charge on the plates. Fringing fields can be ignored. A) What is the voltage across the plates? B) How has the energy stored in the capacitor changed?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 19:20, GusGus11

The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.

Answers: 3

continue

Engineering, 06.07.2019 03:10, netflixacc0107

Consider two concentric spheres forming an enclosure with diameters of 12 cm and 18 cm the spheres are maintained at uniform temperatures ti-50°c and t2 = 250°c and have emissivities .45 and .8, respectively. determine the net rate of radiation heat transfer between the two spheres per unit surface area.

Answers: 1

continue

Engineering, 06.07.2019 03:20, 1xXJOKERXx3

Areaction-bonded silicon nitride ceramic has a strength of 250 mpa and a fracture toughness of 3.4 mpa(m)^1/2, what is the largest-sized internal flaw that this material can support without fracturing? (use y -1 in the fracture-toughness equation.)

Answers: 3

continue

Do you know the correct answer?

A parallel plate capacitor has a separation of 2x10 m and free space between the plates. A 10 V batt...