Engineering, 17.03.2020 04:34, lilianajimva

A steam turbine in a small electric power plant is designed to accept 4500 k~gr of steam at 60 bar and 500:C and exhaust the stem at I0 bar. Assuming that the turbine is adiabatic and has been well designed (so that s,,, = 0), compute the exit temperature of the steam and the power generated by the turbine. b. The efficiency of a turbine is defined to be the ratio of the Lvork actually obtained from the turbine to the work that would be obtained if the turbine operated isentropically between the same inlet and exit pressures. If the turbine in part (a) is adiabatic but only SO percent efficient. what would be the exit temperature of the steam

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, jadeochoa4466

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, Larkinlover703

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

continue

Do you know the correct answer?

A steam turbine in a small electric power plant is designed to accept 4500 k~gr of steam at 60 bar a...