Engineering, 16.03.2020 22:57, C4171

A water-cooled condenser in a large refrigeration system uses R-134a as its refrigerant fluid. The refrigerant enters the condenser at 1.0 MPa and 60 deg C, at a rate of 0.2 kg/s, and exits as a liquid at 0.95 MPa and 35 deg C. Cooling water enters the condenser at 10 degC and exits at 20 degC.

Create a schematic representation of the condenser and draw the boundary of the system needed to answer the next questions. Include the mass and energy interactions across the boundary.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Do you know the correct answer?

A water-cooled condenser in a large refrigeration system uses R-134a as its refrigerant fluid. The r...