Engineering, 13.03.2020 04:59, portedon8644

A cylindrical bar of metal having a diameter of 18.4 mm and a length of 192 mm is deformed elastically in tension with a force of 52400 N. Given that the elastic modulus and Poisson's ratio of the metal are 64.0 GPa and 0.32, respectively, determine the following: (a) The amount by which this specimen will elongate in the direction of the applied stress. (b) The change in diameter of the specimen. Indicate an increase in diameter with a positive number and a decrease with a negative number.

Answers: 3

Show answers

Answers

answered: tanya44737

Part a

The amount by which the specimen will elongate $(\bigtriangleup L)$ in the direction of the applied stress is 0.5912 mm

Part b

The change in diameter $(\bigtriangleup d)$ of the specimen is -0.0184 mm

. Explanation:

When a material is loaded with a force, internal stress is created inside the material and material gets deformed due to the applied load. The deformation occurs in both lateral and longitudinal.

Force:

Force is a push or pull applied on an object, which can resultant changes in the physical properties of the object or causes a certain amount of work done.

Tensile force:

It is the force that acts along the length of the material in the opposite direction that pulls the material apart. The tensile force is positive in magnitude.

Compressive force:

It is the force that acts along the length of the material in the opposite direction that squeezes the material together. The compressive force is negative in magnitude.

Stress:

The internal resistance force acting on the surface of the material per unit area is known as stress.

Longitudinal Strain:

The ratio of change in length to the original length of the specimen is known as strain.

Young’s modulus:

The ratio of true stress to the true strain of the given specimen is known as Young’s modulus.

Poisson ratio:

The ratio of lateral strain to the longitudinal strain is known as Poisson ratio.

Fundamentals

The relation for area (A) of the circular section is given as follows:

$A=\frac{\pi}{4}d^2$

Here, the diameter of the rod is d.

The relation for stress is given as follows:

$\sigma=\frac{P}{A}$

Here, stress is $\sigma$ , load applied is Р , and cross sectional area is A

. The relation for longitudinal strain is given as follows:

$\epsilon=\frac{\bigtriangleup L}{L}$

Here, longitudinal strain is , change in length is $\bigtriangleup L$ , and original length is L.

The relation for Young’s modulus is given as follows:

$E=\frac{\sigma}{\epsilon}$

Here, young’s modulus is E

. The relation for Poisson ratio is given as follows:

$\mu=\frac{lateral\, strain}{longitudinal\, strain}\\\\=-\frac{\bigtriangleup d/d}{\bigtriableup l/l}$

Here, Poisson ratio is $\mu$ , change in dimension is $\bigtriangleup d$ , and original diameter is d.

The negative sign is due the decrease in the diameter of the specimen due to the tensile force.

(a)

Find the area of cross section of the specimen.

$A=\frac{\pi}{4}d^2\\\\=\frac{\pi}{4}(18.4mm)^2\\\\A=265.9mm^2$

Find the change in length of the specimen using young’s modulus formula.

$E=\frac{\sigma}{\epsilon}\\\\=\frac{P}{A}\times \frac{L}{\bigtriangleup L}\\\\\bigtriangleup L=\frac{PL}{AE}=\frac{52400N\times 192mm}{265.9mm^2\times 64\times 10^9\frac{N}{m^2}\times(\frac{1m}{10^3mm})^2}\\\\\bigtriangleup L=0.5912mm$

(b)

Write the relation for Poisson ratio.

$\mu=\frac{lateral\, strain}{longitudinal\, strain}\\\\=-\frac{\bigtriangleup d/d}{\bigtriableup l/l}\\\\0.32=-\frac{\bigtriangleup d/18.4}{0.591/192}\\\\=-0.0184mm$

answered: Guest

answer:

science is the study of the nature and behavior of natural things and the knowledge that we obtain about them. a science is a particular branch of science such as physics, chemistry, or biology. physics is the best example of a science which has developed strong, abstract theories.

pseudoscience is a collection of beliefs or practices mistakenly regarded as being based on scientific method.

plz rate as brainliest

answered: Guest

answer:

no man

explanation:

no i dont want it

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, breannaasmith1122

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

continue

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Do you know the correct answer?

A cylindrical bar of metal having a diameter of 18.4 mm and a length of 192 mm is deformed elastical...